karen@brightsparkelectrician.co.uk

01892 531 728

kitchen dining room

Where Bright Ideas

Come to Life!

How much does it cost to install Mains Smoke, Heat & Carbon Monoxide Alarms

If you've still got battery smoke alarms dotted round the ceiling, I'll be straight with you: they're not doing what you think they're doing. Batteries get taken out because they're beeping at 3am. Units go past their sell-by date and nobody notices. And if the worst happens, your insurer will ask whether you had working, correctly located, in-date detectors — not whether you meant to replace them.

I've been fitting these for 25 years across Tonbridge, Tunbridge Wells, Sevenoaks and Crowborough, and I'll give you straight 2026 pricing, where each alarm type actually needs to go, and why this one isn't a job to have a go at yourself.

How much does a mains-powered smoke alarm cost to install?

If you've already got wired alarms, replacing like-for-like in the same positions is the cheapest and simplest route.

  • First mains-powered smoke alarm: from £185 — supply and installation
  • Additional alarms (up to two more, same visit): from £80 per unit — supply and installation, can be mixed with heat or CO units

Both plus VAT, plus a separate disposal charge for taking the old units away properly.

That price includes a new alarm with a built-in 10-year battery, fitting into your existing wired position, an interlink check so all alarms sound together, and a rundown of when it'll need replacing.

Mains Smoke Alarm

How much does a heat alarm cost?

Heat alarms go in kitchens, garages and utility rooms — anywhere smoke alarms would be triggered constantly by cooking steam or fumes rather than an actual fire. They respond to a rapid temperature rise, not particles in the air.

  • Heat alarms: from £82 each + VAT, supply only

If you're having one fitted alongside smoke or CO alarms, I'll quote the whole job as one fitted price so you know the total upfront.

Mains Heat Alarm

How much does a carbon monoxide alarm cost?

CO is colourless, odourless, and kills quickly. Anywhere fossil fuel is burned — gas boilers, wood-burners, coal fires, gas water heaters — needs a CO alarm.

  • CO alarms: from £125 each + VAT, supply only

Positioning matters here. CO disperses evenly through a room rather than rising like smoke, so alarms usually go at breathing height on a wall or on the ceiling, depending on the manufacturer's instructions and the room layout.

Mains Carbon Monoxide Alarm

How much does a combined heat & CO alarm cost?

In a kitchen with a gas hob, or a compact boiler room, a combined unit covering both heat and CO can be the better call — one device instead of two.

  • Combined heat & CO alarms: from £125 each + VAT, supply only

Mains Heat & Carbon Monoxide Alarm

Why is there a separate disposal charge?

Old alarms are electrical waste under WEEE regulations, and some contain components that need careful handling. Every quote includes collecting your old units and disposing of them properly — it's not an add-on I've bolted on to pad the invoice, it's how they legally have to be dealt with.

 


 

 


Where should each alarm type go?

A properly protected home doesn't rely on one type of detector doing everything. Each one has a specific job:

Smoke alarms — hallways and landings, particularly between bedrooms and escape routes, main living areas, and anywhere with a solar PV inverter or battery storage system. Inverters and battery packs can, in rare fault conditions, overheat — a smoke alarm in that room gives you early warning before it becomes visible elsewhere. Fit on the ceiling, at least 300mm from walls and light fittings, and interlinked so one going off sets all of them off.

Heat alarms — kitchens and garages, ceiling mounted, positioned away from the cooker itself but within the same room.

CO alarms — any room or loft space with a gas boiler, living rooms with wood-burners or open fires, anywhere with a flued or fuel-burning appliance.

Combined heat & CO alarms — kitchens with gas appliances, boiler rooms, or anywhere space is tight and you want one device covering two risks.

Why do alarms only last 10 years?

Every modern alarm — smoke, heat or CO — is designed around a 10-year working life, and that applies to both the sensor and the built-in battery.

Smoke sensors pick up dust and airborne particles over time and get slower to react. Heat sensors go through thousands of thermal cycles and can drift out of calibration. CO sensors chemically age, which reduces their accuracy. That's why decent alarms have a "replace by" date printed on the case — once you're past it, the unit is no longer within its certified working life, whatever it looks like on the ceiling.

The built-in battery in mains alarms is usually a sealed lithium cell with the same 10-year design life as the sensor. You can't just swap the battery — when it's due, the whole unit gets replaced. If yours starts chirping intermittently or shows a fault light, that's it telling you it's done.


Can an old or missing alarm affect my insurance claim?

Yes, and this is the bit most homeowners don't know until it's too late.

If you have a fire and your alarms are clearly past their 10-year mark, or weren't working at the time, that gets noted in the fire investigator's report. Insurers can and do use that to argue you didn't take reasonable safety precautions — and reduce your payout, or in serious cases refuse it outright.

The same applies to old battery-only alarms with the battery removed or dead. If there's no working alarm where there reasonably should have been one, you're looking at the same risk. This is exactly why I push people toward mains-powered, interlinked systems with CO and heat cover where it's needed, kept within their 10-year life.

Can I fit a mains smoke alarm myself?

I wouldn't, and here's why. When you take one of these down, you'll typically find six or more wires behind it — permanent live, neutral, an interlink wire to other alarms, earth, and often a loop-through feed to another part of the circuit. The back box is frequently acting as a junction point for more than just that one alarm.

Get a conductor wrong — mix up the interlink wire with a live, leave an earth loose, assume the colours match modern standards when they don't — and you can disable other alarms in the house, introduce a shock risk, trip breakers, or in the worst case create a fire risk of your own making.

There's also a compatibility issue: not every brand talks to every other brand's interlink system. Swap in a different manufacturer without checking, and your alarms might stop triggering each other altogether. Any electrician doing this properly will identify your existing wiring method, supply compatible units, test that everything sounds together, and carry out the work to BS 7671 and current Building Regulations — including Part P where it applies.

What does a full smoke, heat and CO system look like in a typical home?

Put together properly, a well-protected home usually has:

Smoke alarms in hallways and landings on every floor, the main living area, and any room with solar PV or battery storage. Heat alarms in the kitchen and garage. CO alarms anywhere with a gas boiler or an open fire. Combined heat & CO units in kitchens with gas appliances or compact plant rooms.

Mains-powered, interlinked, and within their 10-year life, that combination gives you early warning of fire, early warning of dangerous CO, and a much stronger position if you ever need to make an insurance claim.


What does Bright Spark do when we survey your alarms?

We check the age and "replace by" date on every existing alarm, confirm they're in the right locations, and test interlinking and basic function. You get clear, itemised pricing before anything's fitted — no surprises on the invoice. Once installed, we test every alarm in front of you and talk you through monthly testing, what the warning chirps mean, and when to expect the next replacement.

Get your alarms sorted

If you're in or around Tonbridge, Tunbridge Wells, Sevenoaks or Crowborough and your alarms are approaching or past 10 years old, don't wait for an incident to find out they're not compliant. It's a modest job that makes a real difference when it counts.

Call 01892 531 728, WhatsApp 07775 561 363, or email karen@brightsparkelectrician.co.uk.

Frequently Asked Questions

How much does it cost to fit a mains smoke alarm in the UK?

From £185 for the first alarm and £80 for each additional unit on the same visit, plus VAT and a disposal charge for the old units.

How long do smoke, heat and CO alarms last?

10 years for both the sensor and the built-in battery. After that, the whole unit needs replacing — the battery can't be swapped separately in modern units.

Can old smoke alarms invalidate my home insurance?

They can affect your claim. If your alarms are past their 10-year life or weren't working at the time of a fire or CO incident, insurers can use that to reduce or refuse a payout.

Can I install a mains-powered smoke alarm myself?

It's not recommended. These alarms often sit on a junction of six or more wires, and incorrect reconnection can disable other alarms, cause faults, or create a fire risk. It should be done by a qualified electrician.

Where should carbon monoxide alarms be fitted?

In any room with a fossil-fuel-burning appliance — gas boilers, wood-burners, coal or gas fires — positioned according to the manufacturer's instructions, usually at breathing height or on the ceiling.

Do I need a heat alarm or a smoke alarm in my kitchen?

A heat alarm. Smoke alarms in kitchens trigger constantly from cooking steam and fumes — heat alarms respond to a genuine rapid temperature rise instead.

Speak to us now.

Thanks for reading — if you'd like a survey of your existing alarms or a fixed price for a full smoke, heat and CO system, request a quote here and we'll get back to you with clear, itemised pricing before anything's booked in.

Prefer to talk it through first? Call 01892 531 728, WhatsApp 07775 561 363, or email karen@brightsparkelectrician.co.uk.

 

Related Articles

Karen runs a great company. She is that very rare breed of taking care, respecting and rewarding her employees. In turn, Terry who carried out our work showed due care and attention and completed works with such professionalism. He interacted with my inquisitive little boy who may, one day may, become an electrician - he certainly had a great role.model to follow!

Marc - Sundridge

We have been very impressed by Bright Spark Electrical Services. Karen Smith visited us to discuss our requirements and gave advice which cut our costs. The work was carried quickly and on time with excellent results. The areas affected were clean and tidy when the work was completed. We had a slight problem with a unit but it was dealt with as soon as it was reported. I have no hesitation in recommending this company and will definitely contact them again for any further electrical problems.

Peter W, Paddock Wood

Very pleased with the Bright Spark team who installed a new Zappi EV charger and replaced our consumer unit. Many thanks for another job well done. Neat & clean. 10/10

Ian - Central Tunbridge Wells

The guys did a great job yesterday – and were very accommodating too (putting things back in cupboards that they had to remove.) I gave them regular coffee / tea (and my wife made them a couple of Apple buns too) – and last night I gave them each a bottle of VERY good wine as a small thank you. GW - Hildenborough

I was very pleased with the quick response and the job was successfully done by a nice Tradesman the cost was competitive And will call this company to carry out any further work.

Karen, East Peckham

REQUEST QUOTE